Accueil
FAQ
Rechercher
S'enregistrer
Membres
Groupes
ConnexionTeam Associated RC8T
Team Associated RC8T
Sylvain le Lun 19 Mai - 14:19
Regardez ca...
Je viens de pré-commander le mien... IL sera disponible, juillet 2008.
The Factory Team RC8T Truggy Kit features:
• Factory assembled shocks, diffs and turnbuckles. Factory Team shock and diff fluids included.
• Factory Team ‘Big Bore’ threaded, hard-coated shocks feature 16mm six hole pistons and 4mm gold shock shafts for maximum smoothness
• Factory Team Aluminum Top Plate and Steering Rack for the ultimate truggy durability
• Factory Team chassis braces with integrated center stiffener that maintains chassis integrity
• 4mm woven carbon fiber shock towers for maximum rigidity, strength, and light weight to keep the center of gravity low
• Blue aluminum wheel hexes featuring captured drive pins and nyloc wheel nuts providing the ultimate in security
• The 4.30:1 ratio gear boxes produce maximum punch allowing the RC8T to accelerate harder out of the corners and up the biggest jumps
• FFC Free Float Caliper brake-system eliminates the possibility of unwanted brake drag while on throttle
• Two-piece split-center diff mount allows quick and easy access to the center diff
• Wing angle and position is fully adjustable and secure
• High-torque capacity three-shoe aluminum clutch
• Full CVAs with captured CVA pins
• Full ball bearing drivetrain and steering
• Metric alloy hardware throughout
• Milled 3mm black hard-coated 7075 aluminum chassis
• Factory Team blue titanium turnbuckles
Je viens de pré-commander le mien... IL sera disponible, juillet 2008.
The Factory Team RC8T Truggy Kit features:
• Factory assembled shocks, diffs and turnbuckles. Factory Team shock and diff fluids included.
• Factory Team ‘Big Bore’ threaded, hard-coated shocks feature 16mm six hole pistons and 4mm gold shock shafts for maximum smoothness
• Factory Team Aluminum Top Plate and Steering Rack for the ultimate truggy durability
• Factory Team chassis braces with integrated center stiffener that maintains chassis integrity
• 4mm woven carbon fiber shock towers for maximum rigidity, strength, and light weight to keep the center of gravity low
• Blue aluminum wheel hexes featuring captured drive pins and nyloc wheel nuts providing the ultimate in security
• The 4.30:1 ratio gear boxes produce maximum punch allowing the RC8T to accelerate harder out of the corners and up the biggest jumps
• FFC Free Float Caliper brake-system eliminates the possibility of unwanted brake drag while on throttle
• Two-piece split-center diff mount allows quick and easy access to the center diff
• Wing angle and position is fully adjustable and secure
• High-torque capacity three-shoe aluminum clutch
• Full CVAs with captured CVA pins
• Full ball bearing drivetrain and steering
• Metric alloy hardware throughout
• Milled 3mm black hard-coated 7075 aluminum chassis
• Factory Team blue titanium turnbuckles
_________________
Team Associated - Futaba - Novarossi ou OS ??? - www.MyRCBox.com
Team Associated Factory Team RC8 - RC10GT2 - SC10
Sylvain- Rang: Administrateur
- Nombre de messages: 1421
Localisation: St-Anaclet (Rimouski)
Date d'inscription: 10/05/2005 
Re: Team Associated RC8T
Martin Plourde le Lun 19 Mai - 14:41
Tous semble beau.. mais maudit que les cab de Associated sont laid !!! Les lumièrs en avant... Y devrais pas en mettre tant qu'à ca... Tu changera le cab sylvain lorsque tu le recevra... 
_________________
Martin Plourde
Buggy Jammin' X2 CR PRO Dynamite Platinum XP / RB C6
E-REVO brushless conversion Platinum Mamba Monster + NEU motor 2200Kv
T.T. ST-1 Truggy
Century Falcon SE II .50 O.S. Hyper V-Blades 600MM
Futaba 4PK FASST 2.4GHz
Futaba 9CAP FASST 2.4GHz
Le club " Xtrême R/C du BSL "
Martin Plourde- Futur expert
- Nombre de messages: 2434
Age: 31
Localisation: Rimouski,Qc
Date d'inscription: 17/02/2006 -
Re: Team Associated RC8T
Sylvain le Lun 19 Mai - 14:43
Même genre de body que le GT2... Ca ressemble au Crowd Pleazer de Pro-Line... Et je les adore... Donc il va rester là.
_________________
Team Associated - Futaba - Novarossi ou OS ??? - www.MyRCBox.com
Team Associated Factory Team RC8 - RC10GT2 - SC10
Sylvain- Rang: Administrateur
- Nombre de messages: 1421
Localisation: St-Anaclet (Rimouski)
Date d'inscription: 10/05/2005 -
Re: Team Associated RC8T
ManiTouU le Lun 19 Mai - 18:18
le cab est tres beau, a l exception des collants de lumiere, t en fait au airbrush!
_________________
Mugen MBX5R
Losi Eight-E
Losi Matt Francis 2
ManiTouU- Futur expert
- Nombre de messages: 1837
Date d'inscription: 17/05/2005 -
Re: Team Associated RC8T
Martin Plourde le Jeu 4 Sep - 6:25
Sylvain, tu devrait recevoir le tiens bientôt! Il sont en stock chez Amainhobbies!!! Tu nous monteras des photos du tiens quand tu l'auras reçu!
_________________
Martin Plourde
Buggy Jammin' X2 CR PRO Dynamite Platinum XP / RB C6
E-REVO brushless conversion Platinum Mamba Monster + NEU motor 2200Kv
T.T. ST-1 Truggy
Century Falcon SE II .50 O.S. Hyper V-Blades 600MM
Futaba 4PK FASST 2.4GHz
Futaba 9CAP FASST 2.4GHz
Le club " Xtrême R/C du BSL "
Martin Plourde- Futur expert
- Nombre de messages: 2434
Age: 31
Localisation: Rimouski,Qc
Date d'inscription: 17/02/2006 -
Re: Team Associated RC8T
cletus78 le Jeu 4 Sep - 6:34
y en avais un au pro series enfin de semaine tres belle machine
cletus78- Intermédiare
- Nombre de messages: 581
Localisation: mont-joli
Date d'inscription: 19/02/2008 -
Re: Team Associated RC8T
Sylvain le Jeu 4 Sep - 7:25
Il est en route... Il est parti le 28 donc il devrait arriver bientôt.
Peut-être le recevoir à temps pour la finale... Jammin' X1 CRT Pro à vendre la semaine prochaine
Peut-être le recevoir à temps pour la finale... Jammin' X1 CRT Pro à vendre la semaine prochaine
_________________
Team Associated - Futaba - Novarossi ou OS ??? - www.MyRCBox.com
Team Associated Factory Team RC8 - RC10GT2 - SC10
Sylvain- Rang: Administrateur
- Nombre de messages: 1421
Localisation: St-Anaclet (Rimouski)
Date d'inscription: 10/05/2005 -
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum